Tools and Parts

[MikeD]

Hi folks,
I moved out of my hangar a few months ago at 7S3 and have the following for sale. Contact me at dealmike2@gmail.com. Thanks.

• 2ea. 26” wing jacks, Manufactured by The Jack House. $300 for the set.
• Portable Oxygen System. Nelson, 22cf, two port regulator, two flow meters, two oxymizer canulas, case and seat back straps.$325.
• Alcor 2/14”, analog EGT gauge with connection lead and clamp type probe. $75.
• Prop spinner with backing plate. Removed from Comanche 2 blade Hartzel. $100.
• Transponder antenna. Probe style. $15.
• Cylinder compression gauge with plug adapter. $55.
• Airwolf oil filter cutter. PN: AFC-470. $60.
• Brake rivet tool (Rapco)—screw handle type. PN: RA-825. $15.
• Vacuum pump wrench. Rapco PN: RA716, $15.
• Magneto timing light. Induction type. Mfg: Action Air Parts. $25.
• Spark plug cleaner with extra abrasive and compressor fitting. $12.
• Champion spark plug clean out tool PN: CT449 (18mm). $5.
• Prop Tach Digital Tachometer. Hand held. Cardnal Electronics. 2-3 blade. $180.
• Rivet Gun kit. Chief PN:CA176-3x. With extra rivets. $350.
• Electric tug. Manufactured by Robotow. $35.
• Fine wire spark plug gap tool. $12.
• AMP Crimp Kit. (Chief Aircraft). ProCrimp tool (AMP PN: 58433-3), case, and approx. 500 terminals. $200.
• Champion oil filter. CH48110. $10.
• Aircraft Winch. Aircraft Spruce PN 13-01764. Includes floor mount P/N 13-06124 and wall plate. Hook cable to tail tie-down ring and press button. Easily moves aircraft up to 3,000 lbs. rolling weight. Comes with 100' of cable and 75' of control cord and has an automatic safety shut off. Cable speed is 30 feet per minute. Voltage 110 AC. Cable speed is 30 feet per minute. $265.
• MS21919 clamps. New. DG4 through DG20. One or more of each. $10.

21. Whelen self-contained strobe. 14V. Split red/white lens. $75.

end